Aprilia        Ducati        Honda        Kawasaki        Suzuki        Yamaha        Replacement Parts
For additional makers of rear sets CLICK HERE

Honda Rear Set Controls
and Replacement Parts from

of Suzuka Japan
 Honda CBR600RR shift side rear set These Rear Set systems and replacement parts are manufactured by Battle Factory in Suzuka Japan, who specializes in racing parts and accessories, of high grade Aluminum.

All foot levers utilize special flanged bearing which is an original design of Battle Factory.

This bearing mounting system gives the levers a very positive, smooth movement as well as a providing a long lasting product.
Many rear sets on the market are simply friction fit with grease for lubricant which will make them a sloppy fit lever movement.

These machined brackets are much stronger than the original cast OEM parts on most machines.

The combination of the high quality brackets and the bearing mounted levers provide a solid foundation and support in the event of a crash.
Pictures shown below are of Honda CBR600RR 2003-2005 4 position rear set controls
   
Many of Battle factories designs are specifically for race only applications. The race only versions do not allow for the use of a side stand in many cases. Those rear sets produced for supersport type race conversions are available in in street shift pattern shifting and also may be available for use with a street side stand.
If a rear brake switch is needed and the OEM unit cannot be used
we offer the LPS400 Liquid Pressure Switch.

levers.jpg (18469 bytes)
Levers and Parts
pegs.jpg (47139 bytes)
Foot Pegs and Rearset Replacement Parts
See application listing below.
 
HONDA NSRmini ALL BA03-H09-09B


 
HONDA NSF100 ALL BA03-H10-09B


 
HONDA

 

 

 

 

 

 

 

HONDA

 

 

 

 

 

 

 

 

HONDA

 

 

 

 

 

 

 

 

HONDA

 

 

 

 

 

 

 

 

HONDA

 

 

 

 

 

 

 

 

HONDA

 

 

 

 

 

 

 

 

HONDA

1991-1994 RS125
Honda

We have had many customers looking
for rear set plates for the pre 1995
Honda RS125 chassis so we had Battle
Factory do a run for us of these hard
to find parts which are no longer
available from Honda/HRC. Many OEM
parts for the motor originally used in
this machine are also no longer
available so many racers who have
mounted other power plants into this
chassis.

We have 20 sets available as of
12/23/09

These plates will accommodate Honda
OEM levers and pegs as well as the
Battle Factory units shown here.

-'94 BA03-H01-9003
SOLD OUT
ba035r.jpg (22469 bytes) RS 125 Step Holder (15 mm down) -94 R
SOLD OUT use STD Position Below
BA03-H01-9004
SOLD OUT
ba035l.jpg (26188 bytes) RS 125 Step Holder (15 mm down) -94 L
SOLD OUT use STD Position Below
BA03-H01-9005
RS125 -1994 Step Holder STD position Right Side
BA03-H01-9006
RS125 -1994 Step Holder STD position Left Side
BA03-004
RS 125 Brake Pedal -2000 (Stock replacement or use with Battle setup).
BA03-005
RS 125 Shift Pedal -2000 (Stock replacement or use with Battle setup)
BA03-081
(without studs)
RS 125/250 Footpeg (Set - stock replacement or for use w/Battle setup) 
RS125R '95-'02 BA03-H01-95B
Complete set
BATTLE
REARSET ASSY RS125 95-
STD Position
BA03-H01-9501
ba048.jpg (22486 bytes) RS 125 Step Holder 95-
(R/L each)
BA03-004
RS 125 Brake Pedal -2000 (Stock replacement or use with Battle setup).
BA03-005
RS 125 Shift Pedal -2000 (Stock replacement or use with Battle setup)
BA03-082
(with studs)
RS 125/250 Footpeg (Set - stock replacement or for use w/Battle setup) 
RS250R '93-'00 BA03-H03-93B
Complete set
  BATTLE
REARSET ASSY RS250 93-00
STD Position
BA03-H03-9301
SOLD OUT
banx593r01.jpg (22852 bytes) RS 250 Right 93-00 (Can be used for stock replacement w/HRC pedals)
BA03-H03-9302
SOLD OUT
banx593l01.jpg (20679 bytes) RS 250 Left 93-00 (Can be used for stock replacement w/HRC pedals)
BA03-041
RS 250 Shift Pedal 93- (Stock replacement or use with Battle setup)
BA03-004
RS 250 Brake Pedal -2000 (Stock replacement or use with Battle setup).
BA03-081
(without studs)
RS 125/250 Footpeg (Set - stock replacement or for use w/Battle setup) 
'01-'02 BA03-H03-01B
Complete set

 

 

BATTLE
REARSET ASSY RS250 01
STD Position
BA03-H03-0101

 

RS 250 Right 2001-02 (Can be used for stock replacement w/HRC pedals)
BA03-H03-0102
  RS 250 Left 2001-02 (Can be used for stock replacement w/HRC pedals)
BA03-006
BATTLE SHIFT PEDAL RS250 01
BA03-004
RS 250 Brake Pedal -2000 (Stock replacement or use with Battle setup).
BA03-081
(without studs)
RS 125/250 Footpeg (Set - stock replacement or for use w/Battle setup) 
NSR250 '90-'95 BA03-H02-90A
  STD
 BRKT & FOOTPEG SET NSR250 90-93
back/30 up/20
BA03-H02-90B
  BATTLE
 REARSET ASSY NSR250 90-93
back/30 up/20
CBR600F/F4i '99-'02 BA03-H04-99B
Complete set
BATTLE
REARSET ASSY CBR600F 99-
4Position
CBR600RR '03-'06 BA03-H04-03B
Complete set
h04-03_05.jpg (70110 バイト)

h04-03_01.jpg (64234 バイト)
BATTLE
REARSET ASSY CBR600RR '03-'05
4Position
 
CBR600RR '07-'08 BA03-H04-07B
  4Position
Link type change system
(not for use with Side stand)
CBR600RR '07-'08 BA03-H04-07D
  4Position
Link type change system
(works with Side stand)
CB1300SF '99-'00 BA03-H05-99B
  BATTLE
4Position
CBR900RR
(CBR929RR)
CBR954RR
'00-'02 BA03-H06-00B
Complete set
BATTLE
 REARSET ASSY CBR900RR 00- (GP Pattern)
4Position race pattern
BA03-H06-00C
  BATTLE
 REARSET ASSY CBR900RR 00- (GP Pattern)
4Position street pattern
BA03-H06-00D
  BATTLE
REARSET ASSY CBR900RR 00- (REG/SIDESTAND OK)
4Position
RVF750(RC45) '94-'97 BA03-H07-94B
BATTLE
REARSET ASSY RVF750 (RC45) 94-97
BA03-003
BRAKE PEDAL CB1300SF 98-
BA03-018
SHIFT PEDAL
BA03-081
(without studs)
Footpeg
  CBR1000RR '04-'07 BA03-H08-04B
  4Position
(race only - no side stand)
BA03-H08-04D
   
  CBR1000RR 2008 BA03-H08-08D   4Position
(Side stand use yes)
BA03-H08-08B   4Position
(race only - no side stand)